Packer

RASCOR Packer Systems

RASCOR packer systems were specifically selected for use with RASCOflex products. Whether for high- or low-pressure injections in civil engineering, structural engineering, or specialist foundation engineering, these packers are perfectly suited for our injection materials. You can choose from single-use plastic packers to durable stainless steel packers.

Lamella packer

  • Plastic lamellar packers have regularly arranged lamellae for stabilization in masonry.
  • They are suitable for low-pressure injections. All RASCOflex products can be injected through the flat-head or conical nipple. After injection, the lamellar packer remains in the wall; only the protruding nipple needs to be trimmed flush. As with steel packers, there is no need for the time-consuming cleaning process.
  • To drive the lamellar packer deep enough into the borehole, we strongly recommend using a suitable driving aid. Otherwise, the connection may be damaged.
Lamellar packer ø 18 mm, length 107 mm including 16 mm flat head nipple and cross slide closure
Lamellar packer ø 18 mm, length 110 mm including air plug and backflow preventer
Lamellar packer ø 12 mm, length 77 mm including air plug and backflow preventer
Lamellar packer ø 12 mm, length 69 mm including conical nipple

Impact packer EV / DV

  • Impact packers with single (EV) or double (DV) valves are suitable for high-pressure injection in structures. The use of extra-thick plastic and a high-pressure steel nipple allows for the connection of more powerful injection pumps. 
  • Once the injection process is complete, the impact packer remains in the borehole. The steel nipple, equipped with a check valve, can then be easily unscrewed.
  • To avoid damaging the impact packer, we recommend using a suitable impact aid. 
Impact packer DV, ø 10 mm, length 66 mm
Impact packer EV, ø 10 mm, length 55 mm, conical

Steel packer

  • Steel (screw) packers are suitable for repeated use in injections. The packer is equipped with a rubber sleeve which expands when tightened in the borehole, thus creating a seal. After injection, the packer can be removed and reinstalled in the new borehole.
  • The advantage of a steel packer lies in the ability to retighten it during injection. This is done either manually or with a wrench.
  • However, the building material should be able to withstand the pressure exerted by the packer.
Steel packer, ø 15 mm, length 115 mm
Rubber length 40 mm, with HD flat nipple
Steel packer, ø 15 mm, length 115 mm
Rubber length 40 mm, with HD conical nipple
Steel packer, ø 13 mm, length 115 mm
Rubber length 40 mm, with HD flat nipple
Steel packer, ø 13 mm, length 115 mm
Rubber length 40 mm, with HD conical nipple
Steel packer, ø 12 mm, length 115 mm
Rubber length 40 mm, with HD flat nipple
Steel packer, ø 12 mm, length 115 mm
Rubber length 40 mm, with HD conical nipple
Steel packer, ø 10 mm, length 115 mm
Rubber length 40 mm, with HD flat nipple
Steel packer, ø 10 mm, length 115 mm
Rubber length 40 mm, with HD conical nipple
Steel packer, ø 9.5 mm, length 115 mm
Rubber length 40 mm, with HD flat nipple
Steel packer, ø 9.5 mm, length 115 mm
Rubber length 40 mm, with HD conical nipple

Screw packer

  • Our stainless steel screw packers will last you a long time. With regular cleaning and maintenance, these packers can be used multiple times. This saves you a significant amount of wear material over a longer period.
  • RASCOR screw packers are equipped with a durable, flexible expansion hose which securely and stably anchors the packer in the structure.
  • Our screw packers are available in various lengths, diameters or connections to perfectly integrate into the accessory set.
Screw packer, ø 18 mm
Length 1000 mm, nominal length 920 mm, A2
Screw packer, ø 18 mm
Length 520 mm, nominal length 440 mm, A2
Screw packer, ø 18 mm
Length 280 mm, nominal length 210 mm, A2
Screw packer, ø 12 mm
Length 340 mm, nominal length 265 mm, A2
Screw packer, ø 12 mm
Length 210 mm, nominal length 135 mm, A2
Screw packer, ø 9 mm
Length 190 mm, nominal length 170 mm, A2

Driving aids

  • Impact packers are best positioned using driving aids. These plastic driving aids prevent the packer connection from being damaged when driven into the borehole. 
  • RASCOR strongly recommends purchasing appropriate impact aids. We offer a suitable impact aid for every corresponding impact packer group.
Impact aid (packer with flat head nipple)
Rod length 170 mm, rod ø 20 mm
Driving aid (packer with conical nipple)
Rod length 140 mm, rod ø 20 mm
Impact aid (packer with air plug)
Rod length 140 mm, rod ø 20 mm